Incra meets Festool CMS

I am very fond of my Festool CMS, but the miter gauge fence is a little flimsy and I wanted a way to attach a "real" fence. So, here is my solution to get a Incra Flip Fence into play. You will need:

Juuma T-Track (or other, outer dimension 18.8x12.6mm).
INCRA Telescoping Flip Fence
3 screws ISO 4762 / M6x25mm
3 slide nuts M6

The holes in the adapter match the holes in the track if you cut it from one end. I used 2-component glue and the screws supplied with the track to secure it.

I bought the T-tracks and the fence here in Germany:

https://www.fine-tools.com/juuma-t-nutschiene.html
https://www.fine-tools.com/incra-flipfence.html

If you look into the track you will see that the small hooks from the festool miter gauge are not centered in the track. It was not a problem for me but you might want to consider adding additional screws if you do not plan on switching fences often (see pictures).

As always: use at your own risk.