Indicator Magnetic Base for Bed Leveling

Here's a magnetic base for your dial indicator. It easily attaches to the hot end shroud on my Ender-3 so I can get the bed super level. Watch the video. I also printed plugs that hold in the magnets. The magnets I used are .437 (11mm) in diameter and .25 (6.35mm)long.

Prints:
- 1x Indicator Holder Body
- 2x Plugs for magnet holes


Parts:
- 1/4x20 X 1.25 Flat Head Cap Screw or 6MM Flat Head Cap Screw
- Nut
- 2.0 inch Dial Indicator - A cheap one from amazon or Harbor Freight is fine.