Indoor Canard Glider

A new indoor glider design with a canard wing. The benefit of this design is that both wings (canard and main wing) provide positive lift.In a classic design, the stabiliser in the back has to produce negative lift to stabilise the aircraft.It's an easy and quick print, less than 10 minutes in PLA or PETG.Removing the print from the plate is where you need to be carefull and take your time.With PLA, mine came out at 3.7 grams.Out of the printer, your glider should be slightly nose heavy, ajust the flaps on the canard downwards to adjust (just a little, as shown on the picture). Happy printing!😋