Thingiverse
Inductive Proximity Sensor Mount - Maker Select / Wanhao i3
por funylilman
21
Descargas
8
Likes
0
Makes
An induction sensor 4mm probe mount for Maker Select V2 or Wanhao Duplicator i3 V2. Tested on Maker Select V2 but mounts should be the same. I used [LJ12A3-4-Z/BX-5V](https://www.amazon.com/gp/product/B07NYD4MVC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) but any 4mm inductive proximity sensor should work.
I used slightly longer screws to add the mount on the top of the fan mount.
Print this SOLID, you do not want any flex or play in the bracket. I also printed it upright with supports to get a clean top, although this used the most support material. Printing this sideways is the most efficient material use but I did not want support material scaring to interfere with the sensor fit.
You have to update the firmware before this sensor can be installed, I used this [youtube video](https://www.youtube.com/watch?v=ejpSniiJejI) by remain indoors to install my bootloader and used the firmware(marlin) and loosely followed the wiring in this [video](https://www.youtube.com/watch?
I used slightly longer screws to add the mount on the top of the fan mount.
Print this SOLID, you do not want any flex or play in the bracket. I also printed it upright with supports to get a clean top, although this used the most support material. Printing this sideways is the most efficient material use but I did not want support material scaring to interfere with the sensor fit.
You have to update the firmware before this sensor can be installed, I used this [youtube video](https://www.youtube.com/watch?v=ejpSniiJejI) by remain indoors to install my bootloader and used the firmware(marlin) and loosely followed the wiring in this [video](https://www.youtube.com/watch?
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!