Thingiverse
Infill Demo
von Oscarnasa21
9
Downloads
7
Likes
0
Makes
About This Model:
This is a 3D printable example of the infill pattern created on the inside of a 3D Print. Print this model flat on the print bed with 0 top and bottom layers, along with a wall count of 5 perimeters. Select the desired infill pattern and density. The model shown above is scaled to 75% and is using a Grid infill pattern of 15%. Use a non stringing filament for best results.
This is a 3D printable example of the infill pattern created on the inside of a 3D Print. Print this model flat on the print bed with 0 top and bottom layers, along with a wall count of 5 perimeters. Select the desired infill pattern and density. The model shown above is scaled to 75% and is using a Grid infill pattern of 15%. Use a non stringing filament for best results.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!