Infinitum 5 side curtains

This is a pair of Side Curtains for the Infinitum 5" Frame.
It's designed to keep all the dirt out of the electronics that typically gets in there if you run reversed Props.
The Right curtain has a cutout at the Position where a OMNINXT F7 has the USB Port. If yours is in a different position just mirror the left one without a cutout and add it manually after printing.

The curtain basically falls right down on the outside of the topplate, anything that is visible outside of the top plate when looking from the top will be in the way. Motor Wirres to the 4in1 typically need to be soldered coming from the inside if this curtain should fit (see the picture from my "naked" frame)

I used TPU for the print but you can use any material that can take a beating. A stiff TPU or PP is most likely the most durable (I just suck at printing PP, so its TPU for me)

Support is Required for printing!!