Infinity Mirror LED Light

A small infinity mirror consisting of a ring with two one-way mirror, a ws2812b led strip in the middle, controlled by WLED. Put a powerbank and the controller box in your jacket pocket and you can bring some light when walking outside in the dark. Comes in 3 versions for different size of LED strips: 4mm, 8mm and 10mm. Note however that I have only made the 8mm version myself, but the concept should work the same with 4mm and 10mm strips (I found the 4mm strip a bit hard to solder in this case, but could possibly work with more patience than I had). Parts needed:ESP32 c3 super mini (AliExpress)A ws2812b LED strip. The one in the model photos is a 144led/m 8mm wide strip (like these)1000uF 6.3v capacitor470 ohm resistorPCB or protoboard3 3-slot screw terminals with 2.54mm pitch (alternatively JST XH connectors)USB-C breakout with 2-pins for power (like these)SS12F15 mini switch (like these)3-pin JST SM male and female connector (AliExpress)3mm thick acrylic one-way mirror, or clear acr