Slicer Discord
Info Orbs v3 – 3D-Druckmodell von MakerWorld MakerWorld
Decor

Info Orbs v3

von Dave · Decor
110 Downloads
47 Likes
62 Makes
Zum Modell
I do not have an AMS, so this is split appropriately to print in separate parts. There is an accent piece that i superglued onto the face of the model. The buttons float freely and sit snug when the front of the case is connected. Major improvementsCase “clips” together between front and rearPCB now mounts to the rear of the case, giving much more strength and no need for hot glueAdditional support piece added to center as wellAccent piece on frontTPU plug for USB cord (optional) - Intent is for the plug to be inserted from the inside of case, with the larger brim on the inside. ========================================================== This is a case for the info orb dev kit from brett.tech Please note the soldering orientation, as it does not follow the guide Brett uses. I used the male to male pins that came in the screen box and soldered to the top of the board, so the buttons and the screen face the same direction. The intention for the power cable is to remain plugged into the ES
Kategorie
Decor
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Warum?
2 Farben
Einteilig 2 Farben / AMS
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
TPU, Polycarbonate
Farben
2 (AMS/MMU empfohlen)
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Dave veröffentlicht auch auf

303 zusätzliche Modelle auf 3 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

5 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen