Inovelli Switch Config Button

I was able to model the configuration button from the new Inovelli Black/Red series dimmer/on off switches. The height of the original was occasionally interfering when trying to use the paddle on the switch.

I included the original button so you could adjust as you see fit. Otherwise there are 3 different basic heights you can choose to try. The button protrudes about 2.5mm on the model from the manufacturer. One of the files shortens this to ~1.7mm, another brings it down to ~1mm, and the final one is nearly flush (or maybe slightly recessed depending on printing).

I printed them in Hatchbox PLA True White.

Here is a video on how to remove the configuration button: https://www.youtube.com/watch?v=6cX1ogretvs

Note: there is a small protrusion in the switch that keeps the button in place. It took some slight prying to free the button of this and remove it.