Insert Muffin Time - 2024

# Insert for "Muffin Time"

This insert has been designed to make the most of the available space in the box of the board game **"Muffin Time"**. It consists of **3 main elements**, each with a specific function.

---
###Print Settings
- Layer Height : 0.2 - 0.3 mm
- Material : PLA
- Supports : No
- Infill : 5%

---
### **Box_card**
- **Description**: This box is dedicated to storing the **game cards**.
- **Dimensions**: **66 x 120 mm**.

### **Attention!**
The game cards have been protected with **protective sleeves**, which slightly increase their size:
- **Width**: Increases from **64 mm** to **66 mm**.
- **Total height of the card stack**: Reaches **120 mm**.

> **⚠️ IMPORTANT NOTE ⚠️**:
> The dimensions of the **Box_card** (66x120 mm) were specifically chosen to accommodate cards with protective sleeves.
>
> - If your cards **do not have protective sleeves**, you may not have issues with width, but the stack of cards might be too short and could fall inside the box.
>
> **📢