Thingiverse
Insta360go Dragon Frog 3 softmount mount
door Tomstoms
2
Downloads
1
Likes
0
Makes
Background:
The dragonfrog frame has some resonance problems at arround 120-130Hz, so without a softmounted cam, The Insta360 Studio can't stabilize the video very good. You know what I mean, if you see it.
Assembly infos:
Yes, the holes for the standoffs are too big and the width is to short, Here you get your "softmount". please use some foam, which you have to insert in the hole together with the standoff. A needle, a screwdriver and some patience are helpful. Please remark LESS foam gives you a better damping. But if the damping is to soft, you can get jello by horizontal oscillations, because the cam ist too loose. You have to test several materials to find the one which works the best for you...
Have fun and beautiful videos :-)
The dragonfrog frame has some resonance problems at arround 120-130Hz, so without a softmounted cam, The Insta360 Studio can't stabilize the video very good. You know what I mean, if you see it.
Assembly infos:
Yes, the holes for the standoffs are too big and the width is to short, Here you get your "softmount". please use some foam, which you have to insert in the hole together with the standoff. A needle, a screwdriver and some patience are helpful. Please remark LESS foam gives you a better damping. But if the damping is to soft, you can get jello by horizontal oscillations, because the cam ist too loose. You have to test several materials to find the one which works the best for you...
Have fun and beautiful videos :-)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!