MakerWorld
Electronics
Zum Modell
Installation aid for electrical flush-mounted boxes (1-3 gang)
43
Downloads
16
Likes
23
Makes
This modular mounting jig simplifies the precise alignment and installation of flush-mounted electrical boxes.The main body holds up to three boxes using accurate guide sleeves. Each box is secured in place with clips and twist-lock tops that fasten with a 90° turn.Two bubble levels (15 × 15 × 40 mm) ensure perfect horizontal and vertical alignment. → Must be boughtFour “feet” are included to ensure the boxes sit exactly flush with the wall surface. If you need to adjust the installation depth (e.g., for plaster compensation), you can easily add spacer cylinders in the BambuLab slicer before printing.Perfect for renovations, new builds, or DIY installations requiring professional precision.- If you have an AMS and want to highlight the alignment slots on the sleeves, you can color them using the edge detection in Bambulab -
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!