Intel/Altera Max10 FPGA dev board enclosure

Enclosure for the Intel/Altera Max10 FPGA dev board (part # DK-DEV-10M50-A).

The "Max10 FGPA" file is the original, designed by Sean Salinas at NMT.

The "Max10 FGPA short" file is my modified version. The walls are thinner (1.2mm for an even 3 shells using a standard 0.4mm nozzle) and shorter by about half to reduce unnecessary plastic usage.

Both cases provide access to all ports and the switches on the bottom of the board. Put the standoff pegs in the octagonal slots, then place the board on top and secure with screws.