Thingiverse
Intel NUC12 Filter
von nIMrOD888
0
Downloads
1
Likes
0
Makes
This is a dust filter for an Intel NUC12WSH.
You will need:
-Glue (i used PVA).
-Filter material.
-Magnetic Tape.
Instructions:
1: Print 2 pieces.
2: Cut filter material
3: Apply glue to the frame of one of the printed pieces.
4: Lay filter material on the glued frame.
5: Sandwhich the filter medium with the other printed piece.
6: Wait until glue has dried.
7: Cut and fit magnetic tape on one side of the filter panel you have just made.
You will need:
-Glue (i used PVA).
-Filter material.
-Magnetic Tape.
Instructions:
1: Print 2 pieces.
2: Cut filter material
3: Apply glue to the frame of one of the printed pieces.
4: Lay filter material on the glued frame.
5: Sandwhich the filter medium with the other printed piece.
6: Wait until glue has dried.
7: Cut and fit magnetic tape on one side of the filter panel you have just made.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
