Inter Milan Logo

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 240x142.85mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used:PLA Kingroon Black Transmission Distance: 0.2PLA Kingroon Blue Transmission Distance: 0.9PLA Kingroon White Transmission Distance: 4.7This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to BlueAt layer #15 (1.28mm