Inter-Tech Mini ITX Q-6 - drilling template

Let your CPU breath by drilling fan ventilation holes into top lid using this template.-print the template (~0.2mm layers)-use double sided tape to secure template on top of the lid alligning it with the rear I/O edge of the case, and ~40mm from the side (see picture)-pre-grain drilling positions (from top)-drill with a small drill-widen the holes with a larger drill (I suggest using 6-7mm)-deburr the holes from both sidesATTENTION: make sure no metal chips are left that can fall onto your mainboard and cause a short circuit. File the holes' inner walls if necessary.Use the right tools for the job and don't hurry or you will end up like me with some holes misplaced :)additional:-blacken the holes using spray or a permanent marker-use dust mesh on inner side (not magnetic) which will also prevent things falling onto the mainboard-remove drive mount plate for better ventilation-replace stock cooler with a low profile quality one (Noctua NH-L9i or Thermalright AXP90-X36)