Thingiverse
Intertap to Pygmy Adapter
von applican
7
Downloads
4
Likes
0
Makes
Using this adapter intertap beer taps (http://www.intertap.beer/products/) can be used on Pygmy coolers (in my case Pygmy 25; https://www.brauundrauchshop.ch/bierk%c3%bchler-pygmy-25).
The beer never touches the printed material, so it should not really be an issue what material you use. Just make sure it is strong enough to handle the pressure and it can be tightened enough. I used ABS, printing it using a Prusa Mini at 0.15mm, 100% infill
Warning: I cannot guarantee that it will be string enough or anything. Print and use at own risk!
Instructions:
* Print it
* Screw on tap
* screw on cooler using the tool included by the pygmy cooler
You can access the construction files (fusion 360) on a360: https://a360.co/2UPMbYt
The beer never touches the printed material, so it should not really be an issue what material you use. Just make sure it is strong enough to handle the pressure and it can be tightened enough. I used ABS, printing it using a Prusa Mini at 0.15mm, 100% infill
Warning: I cannot guarantee that it will be string enough or anything. Print and use at own risk!
Instructions:
* Print it
* Screw on tap
* screw on cooler using the tool included by the pygmy cooler
You can access the construction files (fusion 360) on a360: https://a360.co/2UPMbYt
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
