iPad Cantilever Mount

一直想把Ipad 固定到显示器旁做扩展屏幕，在电商平台都没有找到合适的支架这款支架推荐使用PETG打印，可以提供足够的强度支撑IPad悬臂主杆直径35mm， 如果你需要这款支架，但是不合适你的主杆，可以在评论区告诉我，我可以帮你提供适配。支架需要M3 螺丝， 螺母可以选用普通螺母，或者4.5外径的土八热熔螺母，支架可兼容这两种螺母。I’ve always wanted to fix my iPad next to the monitor as an extended screen, but I couldn't find a suitable stand on e-commerce platforms.This stand is recommended to be printed with PETG, as it provides enough strength to support the iPad.The main arm of the bracket has a diameter of 35mm. If you need this stand but it doesn't fit your main arm, you can let me know in the comments, and I can help provide an adjustment.The stand requires M3 screws. For the nuts, you can choose either regular nuts or M3.5 heat-set inserts with an outer diameter of 4.5mm. The stand is compatible with both types of nuts.