iPad Mic/Music Stand Holder

iPad holder for Gen 5 (2017). Will work both vertically and horizontally, and will fit most mic stands and music stands. There are a variety of different sized arms and swivels to fit it to most needs. All are interchangeable so you can print as many parts and combinations as needed. The photos do not show all parts in use. I used Form Futura TitanX ABS.

The minimum parts that need to be printed are:

Hub
Left Arm
Right Arm
Upper Arm
Long Shaft A or 2 Mini Swivel Shafts
Clamp Main Body (use a pause command to place the Barrel Nut/Cross Dowel)
Clamp Hinge Side
Clamp Lock Barrel
5 Star Knobs

All the other parts can be printed optionally, for any unique situation.

The hinge which couples the Clamp Main Body and the Clamp Hinge Side is a short piece of coat hanger wire, and the clamp swivels in a barrel nut, which I printed in place using a pause command.

Hardware:
T-Bolts (2) to connect Left and Right Arms Arms and Upper Arm
1-1/2" bolts for shaft and swivel connec