Thingiverse
iPhone 12 Pro Max Cases
von langyao
9
Downloads
6
Likes
0
Makes
Hello everyone,
The design from LunaMircea works great on iPhone 12 pro Max, but there isn't any motive on the back that i like. So i tried to make some and here are the results.
! Print 10 % of the size !
You can print the panda easily with TPU.
The albanian eagle is quite complicated. I printed the first layer with 0,2mm with PLA. Then you need to pause the print at the beginning of the second layer and load the TPU filament.
Turn the temperature about 10 degrees up and the flow should be at 300 %. The motive should melt with the second layer.
I hope you liked it and have a nice day ^-^
The design from LunaMircea works great on iPhone 12 pro Max, but there isn't any motive on the back that i like. So i tried to make some and here are the results.
! Print 10 % of the size !
You can print the panda easily with TPU.
The albanian eagle is quite complicated. I printed the first layer with 0,2mm with PLA. Then you need to pause the print at the beginning of the second layer and load the TPU filament.
Turn the temperature about 10 degrees up and the flow should be at 300 %. The motive should melt with the second layer.
I hope you liked it and have a nice day ^-^
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!