Thingiverse
IPhone 18 Pro Max
door SVRR2D21
0
Downloads
0
Likes
0
Makes
Not so easy assembly, but possible, no glue required, but strength necessary!
White piece goes on the top hole, black goes in the bottom.
recommended to print standing up and upside down.
The IPhone in the photo has been sanded with 200 grit, then 7000 grit WET sandpaper.
If you would like to sand your IPhone, I HIGHLY RECOMMEND WET SANDPAPER. If you use normal sandpaper, it will scratch the print. I learned this the hard way.
Also, if you want it to be shiny, not just smooth, use a high grit sandpaper, like 5000, 7000, or 10000, but if you just want smooth, use 800 or 1000 grit sandpaper, as it is faster.
Finally, make sure to have the back of the screen (the part with a lot of texture) facing outward so that it looks good.
White piece goes on the top hole, black goes in the bottom.
recommended to print standing up and upside down.
The IPhone in the photo has been sanded with 200 grit, then 7000 grit WET sandpaper.
If you would like to sand your IPhone, I HIGHLY RECOMMEND WET SANDPAPER. If you use normal sandpaper, it will scratch the print. I learned this the hard way.
Also, if you want it to be shiny, not just smooth, use a high grit sandpaper, like 5000, 7000, or 10000, but if you just want smooth, use 800 or 1000 grit sandpaper, as it is faster.
Finally, make sure to have the back of the screen (the part with a lot of texture) facing outward so that it looks good.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
