Thingiverse
iPhone 5 iPhone SE Case
by cyul
29
Downloads
19
Likes
0
Makes
I remixed samlego2 case for a slightly slimmer profile.
You will need 7 x 5mm countersunk M3 screws.
Your printer has to be well tuned, as tolerances are very tight
I suppose scaling could be used if the case turns out too tight for you.
_Small improvements:_ the buttons only fit in the right order and will maintain their orientation.
The backplate is a blank meant to be customized.
This thing was made with Tinkercad. Edit it [here](https://www.tinkercad.com/things/1RoQ9iU7Fc8)
You will need 7 x 5mm countersunk M3 screws.
Your printer has to be well tuned, as tolerances are very tight
I suppose scaling could be used if the case turns out too tight for you.
_Small improvements:_ the buttons only fit in the right order and will maintain their orientation.
The backplate is a blank meant to be customized.
This thing was made with Tinkercad. Edit it [here](https://www.tinkercad.com/things/1RoQ9iU7Fc8)
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
