Thingiverse

iPhone X Dock

by conny_g

607 Downloads

544 Likes

10 Makes

Go to Model

Designed for iPhone X with the Apple leather cover.

** Why another phone dock? **

The new iPhone X is a few mm taller than the previous phones, so my old printed iPhone dock didn't work anymore. After some browsing I could not find any other dock I liked. The one I liked that doesn't fit does not exist for the X and I dislike mods on STLs/OBJs. The generic ones are typically clumsy or have other issues.
So I decided to design one quickly from scratch. Here's the result I would like to share.
I think there are not enough phone docks out there yet! :-)

** Assembly **

You need a standard apple lightning cable, that works for sure. Others are unclear, I have read the Amazon essentials lightning cables might work as well. The plugs plastic part needs to have the same oval shape, diameter and length.

1. Put the lightning plug through the larger hole from the bottom to the top, then pull it sideways and push the plug into the smaller hole, ideally with flat pliers. If you ar

Charging dock dock iphone iphone x iphone x stand lightning cable Phone Stand stand Charging dock dock iphone iphone x iphone x stand lightning cable Phone Stand stand Charging dock dock iphone iphone x iphone x stand lightning cable Phone Stand stand

Source

Thingiverse

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format