Thingiverse
iPhone X Flexible Case v3
by casiopea987
716
Downloads
571
Likes
15
Makes
ONLY iPHONE X: for XS, XR etc check below!!
An iPhone X case to be printed with flexible filament. I designed it according to Apple's official design guidelines so it should be 100% correct. I've included 2 cases: one with a thick (2mm) back and one with a thinner (1.2mm) back. The thick one protects the camera well. Some people might find it too thick so I've made the thinner one as well. Because that one doesn't protect the camera very well, I've included a ring that can be printed separately and then glued on. The ring is 0.84mm thick but can be scaled in the z-axis to your liking.
I have also made another iPhone X case with built-in clickable buttons: https://www.thingiverse.com/thing:2719669
The blue case was printed by Rapnit (see "Made" section).
If you print this case, please post a photo or review of it in the "Made" section, feedback is always appreciated.
OTHER IPHONE CASES:
XS : https://www.thingiverse.com/thing:3127463
XS MAX : https://www.thing
An iPhone X case to be printed with flexible filament. I designed it according to Apple's official design guidelines so it should be 100% correct. I've included 2 cases: one with a thick (2mm) back and one with a thinner (1.2mm) back. The thick one protects the camera well. Some people might find it too thick so I've made the thinner one as well. Because that one doesn't protect the camera very well, I've included a ring that can be printed separately and then glued on. The ring is 0.84mm thick but can be scaled in the z-axis to your liking.
I have also made another iPhone X case with built-in clickable buttons: https://www.thingiverse.com/thing:2719669
The blue case was printed by Rapnit (see "Made" section).
If you print this case, please post a photo or review of it in the "Made" section, feedback is always appreciated.
OTHER IPHONE CASES:
XS : https://www.thingiverse.com/thing:3127463
XS MAX : https://www.thing
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
