Iron Man Hueforge

The yellow in this hueforge is high TD (transmission distance), if you use a lower TD yellow, it might not blend properly. Orange would be an okay substitute for yellow. Project: ironmaneyes.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 135.05x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.5mmFilaments Used: PLA+ eSun White Transmission Distance: 6.5 PLA+ Esun Space Blue Transmission Distance: 3.5 PLA Kingroon Black Transmission Distance: 0.4 PLA+ eSun Fire Engine Red Transmission Distance: 5.5 PLA PolyLite Yellow Transmission Distance: 11This print uses 5 unique filamentsSwap Instructions: Start with White At layer #6 (0.56mm) swap to Space Blue At layer #9 (0.8mm) swap to Black At layer #13 (1.12mm) swap to Fire Engine Red At layer #19 (1.6mm) swap to Yellow At layer #27 (2.24mm) swap to White for the rest.