Iron Solo Leveling - Hueforge

Iron Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x90mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 3.6mm and the Actual Thickness is 2.88mm     #000000 PLA BambuLab Basic Black Transmission Distance: 0.6     #1c254c PLA BambuLab Matte Dark Blue Transmission Distance: 1     #00358e PLA BambuLab Basic Blue Transmission Distance: 4     #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2     #8bd5ee PLA BambuLab Matte Ice Blue Transmission Distance: 3.5     #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 6 unique filaments Swap Instructions:     Start with Black     At layer #8 (0.72mm) swap to Dark Blue     At layer #12 (1.04mm) swap to Blue     At layer #13 (1.12mm) swap to Black     At layer #17 (1.44mm) swap to Cobalt Blue     At layer #21 (1.76mm) swap to Ice Blue     At layer #29 (2.4mm) swap to Jade White for the rest.