Ironman Graffiti - Hueforge

Ironman Graffiti - Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.56mm Filaments Used: #000000 PLA Kingroon Black Transmission Distance: 0.1 #ffffff PLA sunlu white Transmission Distance: 6.8 #0086d6 PLA Bambu cyan Transmission Distance: 1.7 #c12e1f PLA BambuLab Basic Red Transmission Distance: 3.8 #f4ee2a PLA BambuLab Basic Yellow Transmission Distance: 5.3 This print uses 5 unique filaments Swap Instructions: Start with Kingroon Black At layer #10 (0.88mm) swap to sunlu white At layer #11 (0.96mm) swap to Bambu cyan At layer #12 (1.04mm) swap to BambuLab Basic Red At layer #16 (1.36mm) swap to BambuLab Basic Yellow At layer #23 (1.92mm) swap to sunlu white for the rest.