Isis hueforge

Project: isis 4.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x111.11mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA Hatchbox White Transmission Distance: 10This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Black At layer #13 (1.12mm) swap to Black At layer #20 (1.68mm) swap to Yellow At layer #23 (1.92mm) swap to White for the rest.