ISS Expedition 71 Patch Hueforge

Project: Expedition 71 Patch.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x163.73mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.4mm and the Actual Depth is 2.4mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PETG BambuLab Basic Blue Transmission Distance: 2.5 PETG BambuLab Basic Lake Blue Transmission Distance: 4 PETG BambuLab Basic Red Transmission Distance: 2.5 PETG BambuLab Basic Orange Transmission Distance: 4.5 PETG BambuLab Basic Yellow Transmission Distance: 6 PETG BambuLab Basic White Transmission Distance: 3.5This print uses 7 unique filaments Swap Instructions: Start with Black At layer #10 (0.52mm) swap to Blue At layer #17 (0.8mm) swap to Lake Blue At layer #26 (1.16mm) swap to Red At layer #33 (1.44mm) swap to Orange At layer #38 (1.64mm) swap to Yellow At layer #48 (2.04mm) swap to White for the rest.