It - the clown face - hueforge

Hueforge of the clown face from It The photos shows the result in 150*140mm and a nozzle of 0.4 You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge description Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm The Model is 150x139.5mm in size You may print at higher layer heights below the Base Thickness of 0.88mm The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.32mm Filaments Used: #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 This print