Itachi Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x150mm in size You may print at higher layer heights below the Base Thickness of 1.04mm The Max allowed Thickness is 3.28mm and the Actual Thickness is 3.28mm #080a0d PETG Black Transmission Distance: 0.3 #eb3a3a PETG BambuLab HF Red Transmission Distance: 4.6 #9ea2a2 PETG BambuLab Basic Gray Transmission Distance: 3 #ffffff PETG BambuLab Basic White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #17 (1.44mm) swap to Red At layer #24 (2mm) swap to Gray At layer #37 (3.04mm) swap to White for the rest.