Itachi Uchiha

Project: 宇智波鼬.hfpPrint at 100% infill with a layer height of 0.06mm with a base layer of 0.1mmThe Model is 91.31x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.46mmThe Max Depth is 2.3mm and the Actual Depth is 1.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA PolyLite Grey Transmission Distance: 1 PLA BambuLab Basic Orange Transmission Distance: 8.1 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (0.52mm) swap to Blue Gray At layer #13 (0.82mm) swap to Red At layer #16 (1mm) swap to Grey At layer #18 (1.12mm) swap to Orange At layer #22 (1.36mm) swap to Jade White for the rest.