ITX and SFX Frame \ SFF Case

I couldn't find a frame I was completely happy with. I wanted a frame that will have the following features:No extra part or space wasted to mount a GPUSFX PSU only, PSU at the bottom and exactly in the middle of the motherboardEnough clearance for the PSU fanFrame exactly in the size of an ITX motherboard (170x170mm)So I made my own. Turned out exactly as I hoped on the first attempt. I took a few extra steps to make sure it is printable without any support. BOM:x4 M3 standoffs, HEX, 4.6mm diameter. 15mm+ length is recommended (my motherboard didn't seat properly with the 8mm).x4 M3 8mm Pan Washer Head screwsx4 M3 4-5mm Pan Washer Head screws (motherboard screws)PSU screws (#6-32) that probably came with your PSU - I used thiner ones, not sure if stock PSU screws will fit