Itx case Mcorp

This i s just a ITX case i made for fun. This was made with a stock AMD cooler (spire LED) but because all motherboards are different i choose for same side panels on both sides that limit youre cooler choices and a Shappire 6600XT GPU (it's a tight fit Max gpu lengte would be 195mm).be aware you have to drill all holes (2.5 mm) your self and use 3mm screws. stand offs are needed for the mainboard (about 7mm) and the holes need to be drilled as well.please check this print because you need a few products like stand offs 7mma riserkabel for the graphicscard to mainboard Type R33UL on ali express about 25cm (1)the PSU needs to be like in the link (2) https://nl.aliexpress.com/item/1005007944055263.html?spm=a2g0o.productlist.main.1.4962U4FKU4FKLY&algo_pvid=6a97e933-82b2-4e44-9e80-3fd5d89f968c&algo_exp_id=6a97e933-82b2-4e44-9e80-3fd5d89f968c-0&pdp_npi=4%40dis%21EUR%2122.76%2121.39%21%21%2123.15%2121.76%21%40210385bb17356678852648872e9fc4%2112000042958580257%21sea%21NL%21137837175%21X&c