ITX-hexBOX

Print SettingsPrinter brand: BambulabsPrinter: Bambu P1PRafts: NoSupports: NoResolution: Nozzle 0.40mm / Layer Height 0.20mmInfill: Gyroid 15%Filament brand: AzureFilmFilament color: PurpleFilament material: PLAAdditional material needed, I listed what I used:ruthex RX-M3 x 5,7 threaded inserts for screwholes, (ASIN: B08BCRZZS3)insert soldering tool (ASIN: B0CQXG444N) and ironISO 7380 M3-0.5 x 8mm screws for front and back platesISO 7380 M3-0.5 x 6mm screws to mount ITX board2 pushbuttons for power and reset VISSQH (ASIN: B08G49GVQV)2 colored LEDS 2 x 5mm for power and disk activity CHANZON (ASIN: B0BV3GZFVK)a flat cable with dupont connections (ASIN: B07KYHBVR7)Notes:print using a brim for the front and back plates to prevent warpingfor nice effect use a textured PEI platefirst assemble the back io shield, the 2 sides and a bottom plate, then install the ITX board and finish with the top panel and front plateif you use an ASRock N100DC-ITX board, have a look at my cooling solution I a