Thingiverse
IXS Enterprise
von VogelZoo
10
Downloads
8
Likes
0
Makes
Designed this off of IXS enterprise blueprints I found online. I tried to break it up to print as logically as possible on a small printer.
Printed using Cura with standard settings on a monoprice mini II with white PLA.
(20% infill, 3 outside walls, Dynamic quality-0.16mm layer height)
Print front and back w/ Rings as close to the printbed as possible.
Print Core tall so barrel in the center prints upward.
Print capsule w/ attachment nub (box) down.
All parts will require supports!
Version 2:
- Updated parts to minimize support structure on the large rings
- Reoriented parts to default to desired print direction
Printed using Cura with standard settings on a monoprice mini II with white PLA.
(20% infill, 3 outside walls, Dynamic quality-0.16mm layer height)
Print front and back w/ Rings as close to the printbed as possible.
Print Core tall so barrel in the center prints upward.
Print capsule w/ attachment nub (box) down.
All parts will require supports!
Version 2:
- Updated parts to minimize support structure on the large rings
- Reoriented parts to default to desired print direction
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!