J1772 Sideway mount with catch

A sideways J1772 holder that I remixed from https://www.thingiverse.com/thing:6498024.

I added a second flange for the mounting screws, and striker for the catch on the J1772 plug. Requires four nails or screws.

I used a 0.8mm nozzle on my Prusa Mk4 in draft mode (0.55mm layers) to print this in 51 minutes.

Check the orientation of the mount before you print it. The source design happened to be the oriented the way I needed, with the mounting plate to the right of the connector when the catch on the connector is at the top. If you need to have the mounting plate to the left of the connector, mirror the design in your slicer.