Jack and Zero Glow Hueforge

This is set up for an AMS but can be done by pausing and switching out filaments.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x355.67mm in size Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Glow Green Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 4.8This print uses 4 unique filaments Swap Instructions: Start with Black At layer #28 (2.32mm) swap to Orange At layer #30 (2.48mm) swap to Glow Green At layer #34 (2.8mm) swap to Jade White At layer #44 (3.6mm) swap to Glow Green for the rest.