James Toy train Thomas (BRIO / IKEA compatible)

James No. 5 red engine locomotive toy train Thomas (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below). Happy printing! You will need the following screws to put everything together:10x ISO 14585 (DIN7981) 2.9mm x 13mm4x ISO 14585 (DIN7981) 2.9mm x 19mmGet the screws directly from Bambu Lab Maker's Supply - check the purchase link for Bill of Materials - scroll all the way down! Add ring magnets on each side of the train. Use 2x ISO 14585 (DIN7981) 2.9mm x 13mm screws a plastic washer and small neodymium ring magnets diameter 10mm outer / 4mm inner with height of 5mm.The GCODE of "wagon_hopper_0.2mm..." contains a filament color change at 22.40 mm (Layer 112).Use a small paint brush with acrylic color and paint on the windows, text, roof etc. If you enjoy these models and want to support me, check out my new toy trains wi