Japan landscape hueforge

Project: landscape japon .hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 139.84x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA smatfil White Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with negro At layer #13 (1.12mm) swap to Red At layer #17 (1.44mm) swap to Beige At layer #21 (1.76mm) swap to White for the rest