Jason Mask

jason mask hueforge if you have a light behind it . it will change the picture . Project: jason mask.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 154.57x165.78mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.44mm #c00d1e PLA BambuLab Basic Red Transmission Distance: 3 #080a0d PLA PolyLite Black Transmission Distance: 0.1 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 6.8This print uses 3 unique filamentsSwap Instructions: Start with Red At layer #7 (0.64mm) swap to Black At layer #9 (0.8mm) swap to Jade White for the rest.