Jayson Tatum Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 198.84x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA Kingroon Green Transmission Distance: 3.1PLA Kingroon White Transmission Distance: 5.8This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to GreenAt layer #13 (1.12mm) swap to White for the rest