MakerWorld

Characters

jedi frog

by Geeksngizmos · Characters

6 Downloads

5 Likes

3 Makes

i drew a jedi frog, i printed a jedi frog. enjoy the frog. supports needed but arent too bad to remove, under the cape is a bit tricky but is fine. more coming! if anybody wants to do a multi colour please do :D

jedi star wars frog animal space quick print 1 hour print cool wierd nerdy geeks gizmos

Category

Characters

Source

MakerWorld

Published

22.01.2026

Updated

08.05.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · 2 colors

Single piece Supports required 2 colors / AMS

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Colors

2 (AMS/MMU recommended)

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does jedi frog need supports when printing?

Yes, jedi frog will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print jedi frog?

According to the design notes, jedi frog takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is jedi frog available in?

jedi frog is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is jedi frog free to download?

Yes, jedi frog is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

jedi frog

Similar Models

Add to Collection