Slicer Discord
Jedi Holocron (Geared) with Updates – Modèle 3D imprimable de MakerWorld MakerWorld
Other Props & Cosplays

Jedi Holocron (Geared) with Updates

458 Téléchargements
250 Likes
457 Makes
Voir le modèle
Remixed the great model from UnimatrixRed.Gears trimmed by .64mm for easier assemblyCenter windows painted for multi-colorCenter windows use Concentric top layer for appearanceAssembly:Insert gear A into core half 1 with the gear "notch" aligned to any point of the triangle on the outside of the core half.Press a corner pyramid on to the gear shaft. This will help keep the gear in the correct position during assembly.Work around the core half with remaining 3 gears, alternating gear types A & B. The same gear types should never touch each other.Core half 1 has a recess for a 6x2mm magnet. Be sure to use the corner pyramid with the matching magnet recess in this location.Repeat steps 1-3 with core half 2.Glue magnets into core half 1 and matching pyramid.When you've verified that each core half works smoothly, glue triangle windows to the core and then the pyramids to the gear shafts.Glue the 4 alignment pegs into one completed core half.Place the second completed core half together wit
Catégorie
Other Props & Cosplays
Source
MakerWorld
Publié
Mis à jour
Ce qu'il faut pour imprimer: Intermédiaire Confiance faible
Pourquoi ?
2 couleurs · post-traitement important
Monobloc 2 couleurs / AMS Visserie requise
Supports 1/3
Assemblage 0/3
Réglages 1/3
Taille du plateau 0/3
Post-traitement 2/3
Imprimante
FDM / FFF
Format de fichier
STL
Matériau
PLA
Couleurs
2 (AMS/MMU recommandé)
Post-traitement
Collage, Visserie
Logiciel
Cura, PrusaSlicer ou similaire
Pas encore d'évaluations
Pas encore de commentaires – soyez le premier !

Modèles similaires

6 Suggestions
Feed Blog Slicer Calculateur Recherche par image Soumettre Contact Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Ajouter à la collection