Jeep Hueforge

Project: JeepPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 2mm and the Actual Depth is 2.1mmFilaments Used: PETG BambuLab Basic Black Transmission Distance: 1 PETG BambuLab Basic Gray Transmission Distance: 3 PETG BambuLab Basic White Transmission Distance: 3.5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Gray At layer #15 (1.28mm) swap to White for the rest.