Jesus Hueforge

Jesus hueforge model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 199.99x112.49mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA Black Transmission Distance: 0.6 PLA Azure Blue Transmission Distance: 3 PLA Matte Skin Transmission Distance: 0.7 PLA White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Azure Blue At layer #18 (1.52mm) swap to SkinBorder Only Colors from here until the end. At layer #24 (2mm) swap to Ivory White for the rest.