Thingiverse
Jet Aerator - Bilge Pump
door benny90
26
Downloads
11
Likes
0
Makes
Jet Aerator - Live Bait Tank
This was designed to increase the dissolved oxygen in a live bait tank as two air stones could not sustain the travelling times and the bait would die.
Using the outlet of the bilge pump to flow over a single stone and create turbulent water by using internal veins to make the water rotate. The air hose will need to be sealed through the inlet as it may not be a perfect fit.
The air stone was purchased from a local pet shop, it has an OD of ~15.4mm and 21mm in length plus the tube the fitting.
Specs
Inlet - 19.6mm OD
Air Tubing - 3mm (Roughly 5-6mm external ID depending on pipe)
Air inlet hole - 6mm
Outlet - 14mm ID
Link to video - https://youtu.be/T-VDDm1I98M
Check out my other designs http://www.thingiverse.com/benny90/designs
Need some designed or printed swing me a message on https://www.makexyz.com/printer/benny90
This was designed to increase the dissolved oxygen in a live bait tank as two air stones could not sustain the travelling times and the bait would die.
Using the outlet of the bilge pump to flow over a single stone and create turbulent water by using internal veins to make the water rotate. The air hose will need to be sealed through the inlet as it may not be a perfect fit.
The air stone was purchased from a local pet shop, it has an OD of ~15.4mm and 21mm in length plus the tube the fitting.
Specs
Inlet - 19.6mm OD
Air Tubing - 3mm (Roughly 5-6mm external ID depending on pipe)
Air inlet hole - 6mm
Outlet - 14mm ID
Link to video - https://youtu.be/T-VDDm1I98M
Check out my other designs http://www.thingiverse.com/benny90/designs
Need some designed or printed swing me a message on https://www.makexyz.com/printer/benny90
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!