JGAurora A5 - CoreXY Conversion

I converted my JGAurora A5 to Core-XY. Tried to use as many components as possible from the original printer. So the whole x carrier with hotend etc. can be reused, also all the electronics (including Heatbed - and its Heatbed-Holder) and most of the rods and so on. Designed a Belt holder for easy Belt-Assembly on the "old" Hotendcarrier. LM8UU's for the X-Y-Connection are "clip-in"/"snap-fit".
Printer and conversion worked great, did some alterations - now want to make the final design avialible for others.

You'll need:
- some GT2 6mm Belts (10m should be more than enough)
- 4x LMF10UU
- 2x 10mm Rail (same as Y-Rails on Y of the A5 or just 450mm)
- 2x 8mm Rail 475mm
- 4x 2020 I-Type Extrusion 478mm
- 8x 2020 I-Type Extrusion 490mm
- lots of 2020 I-Type Nuts, M3-M5 Nuts and Bolts and so on
- I used 8x SS F684 ZZ as guide pulleys on the frame and
- 4x 5mm Bore Pulleys GT2 for the carriage
- at least 2 additional LM8UU linear bearings
- MotorCables/Extensions