Thingiverse
JGAurora A5S-A5 Camera Mount
door joebejm
7
Downloads
2
Likes
1
Makes
This is my Camera mount using 1/4x20 Screw. So you can mount your own camera mounts. The Camera mounts on Bed Slider. Is modular for easy assemble and Also for easy removal when need to calibrate bed or any other purpose This way it's not on the way.
Part "A" and Parts ""B" can be assemble and glue together for stronger holding.
Parts "C" and "D" can be loose for removal. (look At The Pictures)
Part "C" is mounted when bed is lifted. Part "D" it has a slot so you just push in and you can pull out with out removing bed.
PARTS are marked "L" for Left Side and "R" for Right Side.
Part "A" and Parts ""B" can be assemble and glue together for stronger holding.
Parts "C" and "D" can be loose for removal. (look At The Pictures)
Part "C" is mounted when bed is lifted. Part "D" it has a slot so you just push in and you can pull out with out removing bed.
PARTS are marked "L" for Left Side and "R" for Right Side.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
