MakerWorld
Hueforge & Lithophane
Voir le modèle
Jigsaw Hueforge
41
Téléchargements
44
Likes
21
Makes
Would love to see your prints!Every boost helps me create more hueforges and give back to the community! :) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 161.07x230mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #16 (1.36mm) swap to Red At layer #23 (1.92mm) swap to Gray At layer #26 (2.16mm) swap to Jade White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
